Mercedes-Benz 2013 CL Operator's Manual page 411

the connection is being established. The
Connecting Call message appears in the
multifunction display. The COMAND
display shows the Information Call
Activated message. The audio output is
muted.
If a connection can be established, the
Connected message appears in the
multifunction display.
The COMAND display shows the
Information Call Activated
If a cellular phone network is available and
there is sufficient GPS reception, the mbrace
system transmits data to the Mercedes-Benz
Customer Assistance Center, for example:
current location of the vehicle
R
vehicle identification number
R
i
The COMAND display shows that an
mbrace call is active. You can change to the
navigation menu by pressing the S
button during the call, for example.
Voice output is not available.
A voice connection is established between
the Mercedes-Benz Customer Assistance
Center and the vehicle occupants. You can
obtain information on how to operate your
vehicle's systems, on the location of the
nearest authorized Mercedes-Benz Center,
and on further products and services offered
by Mercedes-Benz USA.
Further details on the mbrace system can be
found under http://www.mbusa.com
Log in under "Owners Online".
i
The mbrace system failed to initiate an
MB Info call if:
the indicator lamp in MB Info call
R
button : is flashing continuously.
no voice connection to the Mercedes-
R
Benz Customer Assistance Center was
established.
This may be because the corresponding
mobile phone network is not available.
18 USA only.
The Call Failed
multifunction display.
The COMAND display shows the
could not be connected!
Press W to confirm the message.
To end a call: press the ~ button on the
X
Call
multifunction steering wheel.
or
Press the corresponding button for ending
X
a phone call on the COMAND telephone
message.
keypad.
Call priority
When service calls are active, e.g. Roadside
Assistance or MB Info calls, an emergency
call can still be initiated. In this case, an
emergency call will take priority and override
all other active calls.
The indicator lamp of the respective button
flashes until the call is ended. An emergency
call can only be terminated by the Mercedes-
Benz Customer Assistance Center. All other
calls can be ended by pressing the ~
button on the multifunction steering wheel or
the corresponding button for ending a
telephone call on the COMAND telephone
keypad.
Downloading destinations in COMAND
i
The components and operating principles
of COMAND can be found on
18
.
( page 110).
Y
i
You can only use the Destination
Download function if the vehicle is
equipped with a navigation system.
Destination Download gives you access to a
database with over 15 million points of
interest (POIs)/important destinations that
can be downloaded onto the navigation
system of your vehicle. If you know the
destination, you can download the address or
obtain the location of points of interest
Features
message appears in the
Call
message.
Z
409