Mercedes-Benz 2013 CL Operator's Manual page 376

Display messages
374
Display messages
ABC
Malfunction Stop
Vehicle
ABC
Vehicle Rising
Please Wait Briefly
ABC
Malfunction
ë
Off
Possible causes/consequences and M Solutions
The ABC (Active Body Control) vehicle level is too low.
Pull over and stop the vehicle safely as soon as possible, paying
X
attention to road and traffic conditions.
After a few seconds, the vehicle level is adjusted and the display
message disappears.
The vehicle is leaking oil.
The display message is shown continuously.
Pull over and stop the vehicle safely as soon as possible, paying
X
attention to road and traffic conditions. Do not continue driving
under any circumstances.
Notify a qualified specialist workshop or breakdown service.
X
The display message is shown continuously.
ABC is malfunctioning.
Do not drive faster than 50 mph (80km/h).
X
Make only slight steering movements. Otherwise, the front
X
fender or the tires could be damaged if the steering movement
is too large.
Listen for scraping sounds.
X
Visit a qualified specialist workshop.
X
The ABC vehicle level is too low when the vehicle is stationary.
Do not pull away.
X
The vehicle level is set when the display message disappears.
The ABC function is restricted. The vehicle's handling
characteristics may be affected.
Do not drive faster than 50 mph (80km/h).
X
Visit a qualified specialist workshop.
X
The HOLD function is deactivated. the vehicle is skidding.
A warning tone also sounds.
Reactivate the HOLD function later (
X
The HOLD function is deactivated. When the brake pedal is firmly
depressed, an activation condition is not fulfilled.
A warning tone also sounds.
Check the activation conditions for the HOLD function
X
( page 306).
Y
page 306).
Y