Mercedes-Benz 2013 CL Operator's Manual page 119

Avoid using alcoholic thinners, gasoline or
abrasive cleaning agents. These could
damage the display surface. Do not apply
pressure to the display surface when cleaning
it, as this could cause irreversible damage.
Remote control
Overview
You can use the remote control to operate the
COMAND display and SPLITVIEW.
To switch the screen on/off (SPLITVIEW
:
only)
To switch the button lighting on/off
;
To select the screen for remote control
=
operation (COMAND or SPLITVIEW can
be selected)
To select a menu or menu item
?
To confirm a selection or setting
A
Mute
B
To adjust the volume
C
To set the station, skip track, fast
D
forward/rewind, for example
To select a station from presets, select a
E
track, enter directly, enter a phone
number, for example.
To exit a menu (back)
F
Point the remote control at the
X
corresponding screen and execute the
functions by pressing the corresponding
buttons.
i
The remote control's function may be
restricted depending on the angle at which
it is pointed at the respective screen.
Selecting the screen for the remote
control
Turn thumbwheel = until the desired
X
display is highlighted in the window.
Switching the button lighting on/off
Press button ; on the remote control.
X
Depending on the previous status, the
button lighting is switched on or off.
i
If you do not use the remote control for
about 15 seconds, the button lighting
switches off automatically.
Mute
Press button B on the remote control.
X
The sound is switched on/off.
Adjusting the volume
Press one of buttons C on the remote
X
control.
The volume of the currently selected audio
or video source changes.
For COMAND, you can also adjust the
volume for phone calls and navigation
messages.
Selecting a menu/menu item and
confirming your selection
Press the =;9: buttons to
X
select the menu/menu item and press the
9 button to confirm.
At a glance
117
Z