Mercedes-Benz 2013 CL Operator's Manual page 344

Table of Contents

Advertisement

Menus and submenus
342
Gear indicator
:
Upshift indicator
;
Engine oil temperature
=
Coolant temperature
?
Upshift indicator
up
engine has reached the overrevving range
when in the manual gearshift program.
Upshift indicator
up
messages until you have shifted up.
When the engine oil temperature is below
80 †, the oil temperature is shown in blue.
Avoid driving at full engine output during this
time.
i
CL 63 AMG: the status of the ECO start/
stop function (
Y
RACETIMER
Displaying and starting RACETIMER
G
WARNING
The RACETIMER feature is only for use on
roads and in conditions where high speed
driving is permitted. Racing on public roads is
prohibited under all circumstances. The driver
is and must always remain responsible for
following posted speed limits.
You can use the RACETIMER to store lap
times.
With RACETIMER, you cannot use the W
and X buttons on the steering wheel to
adjust the volume.
Press the = or ; button on the
X
steering wheel to select the
Press the 9 button repeatedly until the
X
RACETIMER is shown.
; indicates that the
; fades out other
page 274) is also shown.
AMG
menu.
Gear indicator
:
Seconds indicator
;
RACETIMER
=
Lap
?
You can start the RACETIMER when the
engine is running or if the SmartKey is in
position 2 in the ignition lock.
To start: press the W button to start the
X
RACETIMER.
To display the intermediate time: press
X
the X button to show the intermediate
time.
The intermediate time is displayed for five
seconds.
To stop: press the W button to stop the
X
RACETIMER.
The RACETIMER interrupts timing when you
stop the vehicle and turn the SmartKey to
position 1 in the ignition lock. When you turn
the SmartKey to position 2 or 3 and then
press the W button, timing is continued.
Storing the lap time and starting a new lap
It is possible to store a maximum of sixteen
laps.
Press the X button on the steering
X
wheel to show the intermediate time during
timing.
The intermediate time is displayed for five
seconds.
Press the X button again within five
X
seconds.
The displayed intermediate time is stored
as a lap time.

Advertisement

Table of Contents
loading

Table of Contents