Table of Contents
Advertisement
Removing rear seat head restraints
Fold back head restraint ( page 121).
Pull head restraint to its highest
position.
Push release button 1 and pull out
head restraint.
Installing rear head restraints
Insert head restraint and push it down
until it engages.
Push release button 1 and adjust
head restraint to desired position.
i
Adjust the head restraint in such a way that
it is as close to the head as possible.
Multicontour seat*
The multicontour seat has a movable seat
cushion and inflatable air cushions built
into the backrest to provide additional
lumbar and side support.
The seat cushion movement, backrest
cushion height and curvature can be
continuously varied with switches on the
side of the seat after switching on ignition.
1 Seat cushion depth
2 Backrest bottom
3 Backrest center
4 Side bolster adjustment
Switch on ignition ( page 38).
Controls in detail
Seat cushion depth
Adjust the seat cushion depth to the
length of your upper leg using
switch 1.
Backrest contour
Adjust the contour of the backrest to
the desired position using switches 2
and 3.
Backrest side bolsters
Adjust the backrest side bolsters so
that they provide good lateral support
using switch 4.
i
If, after a period of time, the seat no longer
provides the desired contour, then repeat the ad-
justment procedure.
Seats
123
Advertisement
Table of Contents
