Hands-Free Setting - Mazda 2009 CX-9 Owner's Manual

CX-9_8Z66-EA-08F_Edition3 Page370
Tuesday, March 31 2009 1:53 PM
Interior Comfort
Bluetooth Hands-Free

Hands-Free Setting

qDevice
Device registration
For the registration of a Bluetooth
equipped device to Bluetooth Hands-Free,
refer to Bluetooth Hands-Free
preparation (page 6-120).
Registered device read-out
Bluetooth Hands-Free can read-out the
devices registered to its system.
1. Press the pick-up button (with/without
navigation system) or talk button with
a short press (without navigation
system) or a long press (with
navigation system).
2. Say: [Beep] Setup
3. (Without the navigation system)
Prompt: Select one of the following:
Pairing options, confirmation prompts,
language, passcode, or select phone.
(With the navigation system)
Prompt: Select one of the following:
Pairing options, confirmation prompts,
language, passcode, select phone or
select music player.
4. Say: [Beep] Pairing options
5. Prompt: Select one of the following:
Pair, edit, delete, or list.
6. Say: [Beep] List
7. Prompt: XXXXX..., XXXXX...,
XXXXX... (Ex. Device A, device B,
device C) (The voice guidance reads
out the device tags registered to the
hands-free system.)
6-130
Form No.8Z66-EA-08F
Black plate (370,1)
Press the talk button with a short press
during the read-out at the desired device,
and then say one of the following voice
commands to execute it.
Select phone : Selects device (Mobile
l
phone) when the talk button is short-
pressed.
(With the navigation system)
l
Select music player : Selects device
(Music player) when the talk button is
short-pressed.
Edit : Edits device when the talk
l
button is short-pressed.
Continue : Continues the list read-
l
out.
Delete : Deletes the registered device
l
when the talk button is short-pressed.
Previous : Returns to the previous
l
device in read-out when the talk button
is short-pressed.
8. Prompt: End of list, would you like
to start from the beginning?
9. Say: [Beep] No
10. Prompt: Returning to main menu.
Device selection
If several devices have been programmed,
the Bluetooth unit links the device last
programmed. If you would like to link a
different programmed device, it is
necessary to change the link. The order of
device priority after the link has been
changed is maintained even when the
ignition switch is turned off.
Hands-free phone
1. Press the pick-up button (with/without
navigation system) or talk button with
a short press (without navigation
system) or a long press (with
navigation system).
2. Say: [Beep] Setup