Setting Change (Function Customization) - Mazda 2009 CX-9 Owner's Manual

CX-9_8Z66-EA-08F_Edition3 Page101
Tuesday, March 31 2009 1:51 PM

Setting Change (Function Customization)

The following function settings are possible. These settings can only be changed by an
Authorized Mazda Dealer.
Setting
Advanced key battery
dead indicator
Lock/unlock operation
confirmation beep
*1
sound
*2
Autolock function
*1: When the autolock function is operating, the warning sound will be heard regardless of the setting.
*2: When the autolock function is enabled, windows will not automatically close. You must close them before
leaving vehicle.
Form No.8Z66-EA-08F
Advanced Keyless Entry and Start System
Function
KEY indicator light (green) flashes to indicate
that the advanced key battery power is low.
A beep sound is heard to confirm that all doors or
the liftgate have been locked/unlocked.
When all doors and the liftgate are closed and the
advanced key is being carried and out of
operational range, all the doors and the liftgate
automatically lock after 3 seconds.
(Even if the driver is in the operational range, all
doors and the liftgate are locked automatically
after about 30 seconds.)
Black plate (101,1)
Knowing Your Mazda
After Setting
At Initial Setting
Change
Activated Deactivated
Activated Deactivated
Deactivated Activated
3-19