Mazda 2009 CX-9 Owner's Manual page 354

CX-9_8Z66-EA-08F_Edition3 Page354
Tuesday, March 31 2009 1:53 PM
Interior Comfort
Rear Entertainment System
Symptom
Audio
output from DTS format language is selected and
vehicle played back.
speakers but (The wireless headphones cannot play-
not from back DTS format language)
headphones
The disc is dirty.
Image
and/or sound The disc has a scratch.
is distorted.
Dew condensation on the disc
There are
The LCD is high tech equipment with a
subtle spots
99.99% effective sensor resolution.
or
However, please be aware that 0.01%
luminescent
pixel failure or pixel continuous
spots on the
illuminated pixels may exist.
screen.
Subtitles
Other languages are not recorded on the
cannot be
disc.
changed
Display
Multiple angles are not recorded on the
angle cannot
disc.
be changed
The remote controller is not pointed
toward the receiver on the unit.
There is an obstruction between the
Remote
remote controller and the unit.
controller is
inoperable
The remote controller batteries are
weak.
Remote controller batteries poles are
pointed in the wrong direction.
No power to the headphones.
The headphones' optical receiver is not
pointed towards the main unit's
transmitter.
There is an obstruction between the
headphones and the main unit.
No audio The headphones' batteries are depleted. Replace the batteries with new ones.
output from
The headphones' batteries have not been
the
correctly inserted in the
headphones.
directions.
The headphones are exposed to direct
sunlight.
Power turns off automatically.
6-114
Form No.8Z66-EA-08F
Cause
Select audio other than DTS format.
Clean the signal surface of the disc.
Replace the disc with another one.
Clear the dew condensation.
Check the available language in the instruction manual
accompanying the disc.
Check the available angle in the instruction manual
accompanying the disc.
Point the remote controller toward the receiver on the unit.
The receiver is near the disc slot.
Operate the remote controller avoiding the obstruction so
that the signal reaches the receiver on the unit. The
receiver is near the disc slot.
Replace the batteries with new ones.
Refer to Remote Controller on page 6-80.
Install the batteries in the correct direction.
Refer to Remote Controller on page 6-80.
Turn on the power to the headphones.
Point the headphones' optical receiver towards the main
unit's transmitter. The main unit's transmitter is located
near the disc insertion area.
Avoid the obstruction.
/ Insert the batteries correctly.
Use the headphones while avoiding direct sunlight.
If there is no sound for 3 minutes or longer, or if the
headphones are continuously used for 4 hours, there is a
function which automatically turns the power off. Turn the
power to headphones back on.
Black plate (354,1)
Action