Mazda 2009 CX-9 Owner's Manual page 20

CX-9_8Z66-EA-08F_Edition3 Page20
Tuesday, March 31 2009 1:50 PM
Essential Safety Equipment
Seats
Setting the driver's seat to a pre-
programmed position
There are two methods for setting the
driver's seat to a pre-programmed
position. For example, the type A method
can be used before sitting in the seat and
while the driver's door is open, and the
type B method can be used after getting in
the vehicle with the driver's door closed.
TYPE A
When the ignition switch in the LOCK
position and the driver's door is open,
press the programming button 1, 2, or 3
for the desired seating position.
NOTE
In the following cases, the seat position set
function cancels:
Any of the seat adjustment switches are
l
operated.
The set switch is pressed.
l
A programming button 1, 2, or 3 is pressed.
l
The vehicle starts moving.
l
Vehicle locking/unlocking is done using the
l
transmitter.
Vehicle locking/unlocking is done by
l
pressing the request switch while the
advanced key is being carried.
TYPE B
When the ignition switch the ON position
or the driver's door is closed, press and
hold the desired programming button 1, 2,
or 3.
NOTE
In the following cases, the seat position set
function cancels:
Any of the seat adjustment switches are
l
operated.
The set switch is pressed.
l
The vehicle starts moving.
l
2-8
Form No.8Z66-EA-08F
Black plate (20,1)
Operation using the advanced key/
retractable type key
With advanced key
With retractable type key
Lock button
Unlock button
Programming
One seat position can be programmed into
each advanced key/retractable type key.
After the following conditions have been
met, operate the seat and the advanced
key/retractable type key to program the
seat positions.
The ignition switch in the LOCK
l
position
(The auxiliary key/retractable type key
is removed from the ignition switch)
The driver's door is open
l