Toshiba TECRA R10 Maintenance Manual page 281

4.22 DC FAN
4. Turn over the DC FAN assembly and peel off the INSU FIN UP.
5. Remove the following screws and separate the DC FAN and FIN.
• M2.5×4C
M2.5x4C FLAT HEAD
DC FAN
TECRA R10 Maintenance Manual (960-708)
FLAT HEAD screw
Figure 4-32 Removing the DC FAN (3)
4 Replacement Procedure
×2
INSU FIN UP
FIN
[CONFIDENTIAL] 4- 55