Toshiba TECRA R10 Maintenance Manual page 238

4 Replacement Procedures
Installing the Battery pack
To install the battery pack, follow the steps below and refer to Figure 4-1.
CAUTION: There is a danger that the lithium ion battery pack may explode if not fitted,
operated, handled, or disposed correctly. Dispose always the used battery pack
in accordance with the laws and ordinances of your local authority.
Use only the batteries approved by Toshiba.
NOTE: Check the battery's terminals visually. If they are dirty, wipe them clean with a dry
cloth.
1. Turn off the power of the computer.
2. Disconnect the AC adapter and all other external devices from the computer.
3. Turn the computer face down.
4. Install the battery pack into the battery slot.
5. Make sure the battery is locked.
4-12 [CONFIDENTIAL] TECRA R10 Maintenance Manual (960-708)
4.2 Battery pack