Sony PXW-X200 Operating Instructions Manual page 12

Card slot block
The SxS memory card slots and EJECT buttons
are located behind the cover.
Open the cover
1.
ACCESS lamps (page 23)
2.
SxS memory card slots (page 23)
3.
EJECT (SxS memory card eject) buttons
(page 23)
4.
SLOT SELECT (SxS memory card select)
button (page 23)
12 Part Identification
Rear connector panel
1
2
3
4
2
1.
External device connector (page 26, 60)
3
2.
PC connector (page 127)
3.
i.LINK (HDV/DV) connector (4-pin, S400
conforming to IEEE1394) (page 127)
4.
A/V OUT (audio/video multi output)
connector (page 127)
4
5.
N mark
• Hold a NFC-compatible smartphone near
this mark when making wireless
connection between the camcorder and
smartphone. For details, refer to the
operating instructions of the smartphone.
• NFC (Near Field Communication) is the
international standard for the short range
radio communication technique.
6.
HDMI OUT connector (page 126)
7.
SD card ACCESS lamp
Lights in red while accessing the loaded SD
card.
8.
SD card slot for proxy recording (page 58)
9.
SDI OUT (serial digital output) connector
(BNC type) (page 126)
10.
TC IN (timecode input)/TC OUT
(timecode output) connector (BNC type)
(page 132)
11.
IN/OUT (input/output change) switch
(page 133)
Set this to IN to select TC IN and GENLOCK
IN, and set this to OUT to select TC OUT and
VIDEO OUT.
12.
GENLOCK IN/VIDEO OUT (analog
video output) connector (BNC type) (page
126, 132)
1
5
6
7
8
9
10
11
12