Sony PXW-X200 Operating Instructions Manual page 61

Notes
• Cancel the sleep or screen lock function of the
smartphone in advance.
• Hold the device near to the camcorder without moving
the device until "Content Browser Mobile" starts (1 to
2 seconds).
Connecting to a WPS-compatible device
You can connect the camcorder to a WPS-
compatible device by using the WPS function.
1
Turn the camcorder on.
2
Set "NW&Proxy/USB" (page 114) in
the NETWORK SET menu to
"Network&Proxy."
Note
It may take time (for about 1 minute) until the
wireless LAN function is activated.
The radio wave intensity indication on the LCD/
EVF screen flashes. Wait until the radio wave
intensity indication stops flashing.
3
Select "Access Point" for "Network
Mode" in the NETWORK SET menu
(page 114).
The "AP" indication appears on the LCD
monitor/EVF screen.
4
Select "Execute" for "WPS" in the
NETWORK SET menu (page 115).
5
Select "Network Setting" > "Wi-Fi
Setting" on the device, then set "Wi-Fi"
to on.
6
Select the camcorder's SSID from the
SSID list in "Wi-Fi Network" on the
device, then select "WPS Push Button"
in "Option" on the device.
Notes
• The operation method differs depending on the
device.
• For the SSID and password of the camcorder,
check "SSID&Key" in the NETWORK SET
menu (page 115).
7
Start the browser on the device, then
access "http://192.168.1.1:8080/
index.html."
The screen for inputting "User Name" and
"Password" appears.
For the user name and password of the access
authentication, check "User Name" and
"Password" in the NETWORK SET menu
(page 116).
8
Input the user name and password, then
select "OK."
Connecting by inputting an SSID and
password on a device
You can connect the camcorder to a device by
inputting an SSID and password on a device.
1
Turn the camcorder on.
2
Set "NW&Proxy/USB" (page 114) in
the NETWORK SET menu to
"Network&Proxy."
Note
It may take time (for about 1 minute) until the
wireless LAN function is activated.
The radio wave intensity indication on the LCD/
EVF screen flashes. Wait until the radio wave
intensity indication stops flashing.
3
Select "Access Point" for "Network
Mode" in the NETWORK SET menu
(page 114).
The "AP" indication appears on the LCD
monitor/EVF screen.
4
Select "Network Setting" > "Wi-Fi
Setting" on the device, then set "Wi-Fi"
to on.
5
Connect the device to the camcorder by
selecting the camcorder's SSID from
the SSID list in "Wi-Fi Network" and
inputting the password on the device.
For the SSID and password of the camcorder,
check "SSID&Key" in the NETWORK SET
menu (page 115).
Note
The operation method differs depending on the
device.
6
Start the browser on the device, then
access "http://192.168.1.1:8080/
index.html."
The screen for inputting "User Name" and
"Password" appears.
Connecting to Other Device via Wireless LAN 61