130 en | Connection
6.10
DCN-WCH05 Battery Charger
Connect a locally approved power cable to the battery charger.
Figure 6.27 Power inlet
With the loop-through socket, you can connect battery chargers.
–
–
Figure 6.28 Loop-through socket
DCN-NG_IOM_V4.1 | V1.3 | 2012.07
If the power supply is 100 - 127 V(AC), 50 - 60 Hz, you can connect a maximum of 5
battery chargers.
If the power supply is 220 - 240 V(AC), 50 - 60 Hz, you can connect a maximum of 10
battery chargers.
Installation and Operation manual
Conference System
Bosch Security Systems B.V.