Supervisor Level; Opening The Supervisor Level; Access Via Code; Change Code - Miele PDR 908 HP Operating And Installation Instructions

Supervisor level

Opening the supervisor level



Programs Favourites
Touching the  sensor control takes
you to the supervisor level.

Access via code

The supervisor level is accessed using
a code.
Factory default: the code is 000.

Change code

You can alter the supervisor level
access code to protect the tumble
dryer from unauthorized access.
Carefully enter a new code.
Please inform Miele Service if you
have forgotten your new code. Miele
Service will have to reset the code.
Make a note of your new code and
store it in a safe place.
86

 
Supervisor
Help

Demo program

11:02
In showrooms, a demo program can
be started with a simulation.
A program does not start. The
operational sequence is simply a
simulation.
Useful tip: The demo program will only
be available if a drying program lasting
more than 1 hour has not been carried
out. After this, the demo program will
no longer be available.

Closing the settings menu

 Touch the  sensor control.
The display will then go back to the
previous menu level.
 Touch the  sensor control.
The display will change to the main
menu.

Controls / Display

Language

The display can be set to appear in
one of several different languages. To
select the language you want, go to
the Languages sub-menu.
You can change the language as
follows:
- Permanently using the supervisor
level (= "Supervisor language").
- For the duration of the current
program only using the  sensor
control. The supervisor language is
displayed again at the end of the
program.