Supervisor level
Opening Supervisor level
The settings menu in the
is locked against unauthorised ac-
level
cess. The menu can be unlocked with
a code.
Access via code
The supervisor level is accessed using
a code.
Factory default: the code is 000.
Change code
You can alter the supervisor level ac-
cess code to protect the tumble dryer
from unauthorised access.
Carefully enter a new code.
Please inform Miele Service if you
have forgotten your new code. Miele
Service will have to reset the code.
Make a note of your new code and
store it in a safe place.
80
Demo programme
In showrooms, a demo programme
Supervisor
can be started with a simulation.
The programme does not start. The op-
erational sequence is simply a simula-
tion.
Tip: The demo programme will only be
available if a drying programme lasting
more than 1 hour has not been carried
out. After this, the demo programme will
not be available.
- Factory default: Off
- On