Service
Clean out the airways
The tumble dryer's electronic
calculates the degree at which lint or
detergent residue in the lint filters and
air ducts are impairing performance. A
message to check the contamination
appears. You can decide at what level
of lint this reminder should be emitted.
This prompt, which you can configure,
is displayed:
Clean the lint filter and rinse
the plinth filter.
- Off
The prompt does not appear.
However, if there is a very severe
blockage in the ducting, the program
will be cancelled and the prompt will
appear in the display regardless of
this option.
- Heavy
The prompt only appears when there
is a heavy build-up of lint.
- Factory default: normal
- Sensitive
The prompt appears when there is
only a small build-up of lint.
Supervisor level
Service interval
The tumble dryer shows a custom
message at a selected interval to
prompt you to undertake specific
maintenance tasks.
3 different messages can be created:
1/2/3. Each message is created in the
language and alphabet of the current
supervisor language.
Your message is displayed at the end of
the program and can be acknowledged
with
. The same message appears at
OK
the end of the next program.
Settings
This setting allows you to determine the
interval (by hours or date) at which the
message appears.
- Factory default: Off
- By time
You can then select a time interval
from 1–9999 hours.
- By date
You can enter a date.
Message text
Enter your message for your planned
maintenance work. You can edit one,
two, or all three of the 1/2/3 messages.
Reset the display
The message appears until the display
is permanently reset. The message then
appears again once the next interval is
reached.
97