Room Ventilation; External Control Equipment - Miele PDR 908 HP Operating And Installation Instructions

Installation and connection

Room ventilation

- Air drawn in for use in the drying
process will be warm when it is
expelled back into the room. You
must therefore ensure that the room
is sufficiently ventilated, particularly if
the dryer is located in a small room.
- Make sure that the room temperature
is not too high. If there are other
heat-producing appliances in the
room in which the dryer is located,
make sure the room is well ventilated
and switch the other appliances off.
Otherwise running times and energy
consumption could be increased.
82

External control equipment

An optional accessory unit has to be
purchased to set up a connection with
external systems:
- XCI box communication module
(e.g. for peak load control units or
payment systems)
- XCI-AD communication adapter (for
payment systems only)
Payment system
(If applicable)
This tumble dryer can be fitted with a
payment system (optional Miele
accessory). Therefore Miele Service
needs to program a setting in the dryer
electronic and connect the payment
system.
Coins/tokens must be removed from
the coin box regularly. Otherwise, the
payment system will become blocked.