When Using Pc - Panasonic LP-V Series Operation And Maintenance Manual

2-2-3 When Using PC

To use the PC installed the software in attached
CD-R "Laser Marker Driver & Utility" with online
status, connect the attached USB cable to the front
side of the controller.
Notice
• USB cable should not be connected in parallel
with the controller power cable or the motor
power cable.
⿎ Operating environment of Laser Marker NAVI
The PC setting software "Laser Marker NAVI" is stored in the attached CD-ROM "Laser Marker Driver & Utility".
To use this software, install the data in the CD-ROM to the commercially available PC in the following environment. For the
installation procedures, refer to "Laser Marker NAVI Operation Manual" stored in the CD-ROM.
Item
OS *1
Free area on hard disk
CD-ROM drive *2
USB port
Memory capacity
Display resolution
Others
*1 : The CPU type, memory capacity, hard-disk space, and display function required to operate each OS should be
provided in accordance with the recommendation of Microsoft.
*2 : To install the software on a PC without a CD-ROM drive, copy all CD-ROM data to the PC using external storage
media such as a USB flash drive before installation.
Reference
• Laser Marker NAVI can be installed in English or in Japanese. It is preferred that the OS language corresponds to the
installation language. If the OS language is other than English or Japanese, install Laser Marker NAVI in English.
⿎ Installation procedures
Set the CD-ROM "Laser Marker Driver & Utility" to the PC and the installation will start automatically.
Install "Laser Marker Driver & Utility" by following the instructions shown on the screen.
If the installation screen does not appears, double-click on following file to start installation.
[CD-ROM]\Setup\LaserMarkerDriverAndUtility\setup.exe
To USB connector B
Installation requirements
®
Windows 10 Pro 32bit, 64bit
®
Windows 8 Pro 32bit, 64bit
®
Windows 7 Professional 32bit, 64bit
®
Windows Vista Business 32bit
®
Windows XP Professional 32bit
100MB or more
1 set or more
USB1.1 and upper grade
1GB or more
1024 x 768 pixels or above
Pointing device such as a mouse and character input device such as a keyboard
ME-LP400V-OP-6
Front side of
Controller
USB Cable
PC
75