Functional Description - Panasonic LP-V Series Operation And Maintenance Manual

4-2 Functional Description

Functions
Marking order optimizing
Intersection offset
Counter marking
Current date marking
Expiry date marking
Lot marking
Time hold input
Logo data marking
Barcode marking
Processing Performance
function
Arbitrary Point Irradiation
Function
Flying Object marking
function
Step & Repeat
Over-marking
Rank marking
External offset (X/Y)
Serial data marking
Bold character marking
Marking shape setting
Font selection
Marking image display
Guide laser function *1
Dual pointer function *1
124
Outline
This allows rearranging of marking order of characters to shorten the time required for
marking.
This keeps the intersection points of characters from being engraved too deeply.
The marking is performed sequentially according to the counter conditions you set.
(Count-up/Count-down)
This allows marking of current date or time.
This allows marking of date or time calculated by adding the specified period/time to the
current date or hour.
This allows marking by replacing the current (expiry) date, time, and counter value with
specified character string for marking.
The time hold signal equipped in I/O connector keeps the time and date at the timing of
its ON input.
By following the holding time, the functions based on the clock, such as current date,
expiry date, lot and counter reset at updating operate.
This allows marking of the drawing data in DXF/HPGL/BMP/JPEG/AI/EPS form. (DXF
format data may be directly imported into the laser marker. Other data needs to be
converted using the attached software in advance.)
Marking of various bar codes, 2D codes and composite codes is possible. Inputting
character data will automatically generate a bar code.
Specify the coordinates for "Straight Line", "Circle", or "Arc", and radiate the laser.
Specify the coordinates for "Point" and exposure time, and radiate the laser.
Marking following the moving target object is possible according to the specified line
speed and encoder signal.
This allows marking of character string in matrix state by specifying the numbers of Row/
Column and the Intervals.
Overlapping marking is done according to the specified overwriting frequency and
interval.
A number of character strings are registered in the data table, and marking is done by
switching with the I/O signals.
A number of marking coordinates are registered in the data table, and marking is done
by switching with the I/O signals.
Marking is performed, changing the marking character string using communication
command.
Mark a character string in bold.
This allows for selection of marking shapes: "Straight Line", "Proportional", "Justify", and
"Fan like form".
This allows for selection of registered fonts for marking character (alphanumeric). Fonts
can be newly created and edited with the attached software.
This allows displaying of characters or graphic to be marked on the image screen.
The marking position can be checked with the red guide laser. (Marking area , and
character string to be marked)
The work distance can visually be confirmed using the guide laser and laser pointer.
ME-LP400V-OP-6