Panasonic LP-V Series Operation And Maintenance Manual page 177

Description
9 Starting Position :
Specifies the start position of counter in the Step & Repeat patterns.
Select the position between [Upper L] or [Upper R].
10 Direction :
When the Step & Repeat counter is used, select the direction of counting between horizontal and vertical.
Reference
• This direction setting is applied only to the counting direction, but not to the marking order.
• If the counter function is set with Step & Repeat, the counting order becomes as follows.
Ex. Step & Repeat of 3 rows and 3 columns with counter update at each step. ("1" is the base position.) :
1 2 3
4 5 6
7 8
9
Starting Position: Upper L
Marking Direction: horizontal
Step & Repeat setting sample
Setting parameter:
• Character: ABC
• Number of Rows: 4
• Number of Columns: 3
• Row Step: 5 mm
• Column Step: 10 mm
Reference
• The settings of "Common Condition" in "General Condition" are reflected after the settings in "Step & Repeat" are
applied.
3 2 1
6 5 4
9 8
7
Starting Position: Upper R
Marking Direction: horizontal
1st
2nd
Number of
Rows: 4
3rd
4th
ME-LP400V-OP-6
1 4 7
2 5 8
3 6
9
Starting Position: Upper L
Marking Direction: vertical
Number of Columns: 3
1st 2nd
ABC ABC
ABC ABC
ABC ABC
ABC ABC
Column Step: 10 mm
7 4
8 5
9 6
Starting Position: Upper R
Marking Direction: vertical
3rd
ABC
ABC
ABC
Row Step: 5 mm
ABC
1
2
3
177