GE RPV311 Technical Manual page 93

RPV311
19.2.2 Adding analog channels
RPV311-TM-EN-7
Channel name RA33x input
D1 A201
D2 A217
D4 C201
D_Linha2 B201
D_Linha3 B202
G1
G2
D10 A210
D11 A211
D12 A212
The analog data possibilites for the DNP3 communication procol are the same as for
MODBUS. The MODBUS analog data are shown in section 1.3.
To configure the analog data, access the M
Analog data are added in a sequential way, like the digital channels, but the starting
number for the analog channels is 5. Numbers 0, 1, 2, 3 and 4 are reserved for
equipment information.
Figure 44 shows the analog channels selected at the M
table below it shows the associated number at the DNP3 database for each example
analog channel.
Channel type
Physical
Physical
Physical
Physical
Physical
GOOSE
GOOSE
Physical
Physical
Physical
Note:
For analog channels, the first number associated at the DNP3
database is 5. Numbers 1, 2, 3 and 4 are reserved for equipment
information.
Chapter 4 – Configuration
DNP3 Database associated number
00
01
02
03
04
05
06
07
/DNP3 menu via web interface.
ODBUS
/DNP3 menu and the
ODBUS
93