Figure 8: Initial Configuration Screen - GE RPV311 Technical Manual

Chapter 4 – Configuration
46

Figure 8: Initial configuration screen

A. Equipment identification
B Menu configuration items. It is recommended that the configuration of the
equipment be performed item by item in top-to-bottom order. The menu items in the
configuration can be configured one by one and by clicking on the <O
changes are saved in the interface but will not be sent to the equipment. By clicking
on the <C > button, the changes are discarded.
ANCEL
C The <L > button allows user to logout the configuration section.
OGOUT
D To send the changes to the equipment, click on the <T
sending the configuration to the equipment, the user must define the changes to be
included in the configuration history. By clicking the <O
send and the equipment will be temporarily unavailable.
E Arrows to pass by the menu items.
If the configuration is not transmitted to the equipment, the changes are not applied.
Opening more than one configuration section at a time is not allowed. If a second
session is required, the following message will show:
The server is temporarily unable to service your request due to maintenance
downtime or capacity problems. Please try again later.
By using the Configuration Tool, which is part of the RPVTools package, it is possible
to receive, manage, save, edit and transmit the configuration between equipment
and a computer.
For information about the Configuration Tool, see
.
Tools
> button, the
K
> button. Before
RANSMIT
> button, the configuration is
K
Chapter 12: Software – RPV
RPV311-TM-EN-7
RPV311