Chapter 4 – Configuration
Figure 15: Analog inputs configuration section for Sampled Values channels
2.6
Access Control
56
A The P
indicates the position of each analog input according to the Sampled
OSITION
Value message.
B The I
scroll box allows user to select the type of the signal to be received as
NPUT
Sampled Values.
C The A
text field allows user to enter a correction factor to adjust the
DJUSTMENT
accuracy of the measurement
The equipment has independent access control to:
Check the equipment status, monitor the measured values, access the
records and the equipment's configuration;
Firmware Upgrade;
Maintenance;
Modem connection.
In the section shown in
Figure 16,
will be required for every access and it also allows user to exchange the update
firmware password and the download password.
.
it is possible to determine whether the password
RPV311
RPV311-TM-EN-7