Control Panel & Features - Maytag MEDX550XW Use And Care Manual

CONTROL PANEL & FEATURES
7
POWER/CANCEL BUTTON
1
Press to turn the dryer on and off.
2 DRYER CYCLE KNOB
Use your Dry Cycle Knob to select available cycles on your
dryer. Turn the knob to select a cycle for your laundry load.
See "Cycle Guide" for detailed descriptions of cycles.
START/PAUSE BUTTON
3
Press to start a cycle, or press once while a cycle is in
process to pause it.
4
MODIFIERS AND OPTIONS
Temp Level
Select a drying temperature based on the fabrics in your load.
If you are unsure of the temperature to select for a load, select
the lower setting rather than the higher setting.
NOTE: The Air Dry Temp Feature is not available on the
Sensor Cycles.
Wrinkle Prevent Feature
When you are unable to remove a load of clothes from the
dryer as soon as it stops, wrinkles can form. The WRINKLE
PREVENT feature periodically tumbles, rearranges, and fluffs
the load to help keep wrinkles from forming.
Get up to 60 or 150 minutes for models with two choices,
n
90 minutes for models with only one choice of heat-free,
periodic tumbling at the end of a cycle. Press the WRINKLE
PREVENT button to turn ON or OFF at any time before the
cycle has ended.
Timed Dry (for use with Timed Cycles only)
Will run the dryer for the specified time on the control.
Depending on model, temperature may be selected on the
cycle knob or may be located on a separate control.
1
6
Not all features and options are available on all models.
Appearance may vary.
2 3
5
5 SIGNALS
Damp Dry Signal (for use with Sensor Cycles only)
Selecting the Damp Dry Signal will alert you when your
clothes are approximately 80% dry. This is useful when
you want to remove lightweight items in a mixed load to
avoid overdrying or remove partially dry items that may
need ironing.
End Signal
The End Signal produces an audible sound when the drying
cycle is finished. Promptly removing clothes at the end of the
cycle reduces wrinkling.
Press END SIGNAL until the desired volume (High or Low)
is selected.
NOTE: When the Wrinkle Prevent setting is selected and the
End Signal is on, the tone will sound every 20 minutes until
the clothes are removed, or the Wrinkle Prevent setting ends.
CYCLE STATUS LIGHTS
6
Lights indicate the progress of the drying cycles.
INTELLIDRY™
7
Senses moisture in the load or air temperature and shuts off
when the load reaches the selected dryness level. Gives the
best drying in the shortest time. Drying varies based on fabric
type, load size, and dryness setting.
5
4
5