Led And Beeper Indications - Datalogic PowerScan 7000 2D Quick Reference Manual

LED and Beeper Indications

The imager is equipped with a beeper (speaker) and two indicator LEDs;
one green and one yellow. These indicators "beep" or flash when certain
actions take place:
NOTE
Condition
Powering On
UKBW/RS-232 Models
(using UKBW interface)
Powering On
UKBW/RS-232 Models
(using RS-232 interface)
Powering On
All Other Models
Good Read
Error Indication
Condition
Ready to Operate
a. Good Read indications are synchronous. That is, if Good Read beeps
are set via programming to five (for example), the Good Read LED will
also flash five times.
Quick Reference Guide
Some LED and Beeper indications are user-con-
figurable for volume, pitch, quantity, duration,
enable/disable, etc. Those listed in the following
table assume the feature is enabled. See the
Product Reference Guide (PRG) for detailed pro-
gramming information.
Green LED
2 normal flashes and 2 fast flashes
(+ 1 normal flash with Smart cable)
2 normal flashes and 1 long flash
Bright Green Flash
1 - 9 Bright Green Flash(es)
Green Flash
Yellow LED
Yellow LED on steady until trigger is pulled
LED and Beeper Indications
a
Beeper
One Beep
One Beep
One Beep
a
1 - 9 Beep(s)
Special Beep
Beeper
None
3