Service The Parksense® Rear Park Assist System - Dodge 2014 Charger Owner's Manual

280 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Adjustable Chime Volume Settings
Chime volume settings can be selected from the
Uconnect® System.
The chime volume settings include LOW, MEDIUM, and
HIGH. The factory default volume setting is MEDIUM.
ParkSense® will retain its last known configuration state
through ignition cycles.
Service The ParkSense® Rear Park Assist
System
During vehicle start up, when the ParkSense® Rear Park
Assist System has detected a faulted condition, the
instrument cluster will actuate a single chime, once per
ignition cycle, and it will display the "CLEAN PARK
ASSIST", "SERVICE PARK ASSIST" or "SERVICE PARK
ASSIST SYSTEM" message for five seconds. Refer to
"Electronic Vehicle Information Center (EVIC)" in "Un-
derstanding Your Instrument Panel" for further informa-
tion. When the shift lever is moved to REVERSE and the
system has detected a faulted condition, the EVIC will
display the "CLEAN PARK ASSIST", SERVICE PARK
ASSIST or the "SERVICE PARK ASSIST SYSTEM" mes-
sage for as long as the vehicle is in REVERSE. Under this
condition, ParkSense® will not operate.
If "CLEAN PARK ASSIST" appears in the Electronic
Vehicle Information Center (EVIC) make sure the rear
fascia/bumper is clean and clear of snow, ice, mud, dirt
or other obstruction and then cycle the ignition. If the
message continues to appear see an authorized dealer.
If "SERVICE PARK ASSIST" or "SERVICE PARK ASSIST
SYSTEM" appears in the EVIC, see an authorized dealer.