Dodge 2014 Charger Owner's Manual page 350

348 UNDERSTANDING YOUR INSTRUMENT PANEL
is pressed. To change the Touchscreen Beep setting press
and release the "ON" or "OFF" soft-key, then touch the
arrow back soft-key.
• Fuel Saver Display
Touch the "Fuel Saver Display" soft-key to turn the ECO
message (located in the instrument cluster display) on or
off. To make your selection, touch the "Fuel Saver Dis-
play" soft-key and select "ON" or "OFF." Then touch the
arrow back soft-key.
Clock
• Set Time
Touch the Set Time soft-key to change this display. When
in this display, you may select the time display settings.
To make your selection, touch the Set Time soft-key,
adjust the hours and minutes using the up and down
soft-keys, select AM or PM, select 12 hr or 24 hr. Then
touch the arrow back soft-key when all selections are
complete.
• Sync Time — If Equipped
Touch the Sync Time soft-key to change this display.
When in this display, you may have the radio set the time
automatically. To change the Sync Time setting, press and
release the ON or OFF soft-key. Then touch the arrow
back soft-key.
Safety/Assistance
• Front Collision Warning — If Equipped
Touch the "Front Collision Warning" soft-key to change
this display. The Front Collision Warning (FCW) feature
can be can be set to Far, set to Near or turned Off. The
default status of FCW is the Far setting. This means the
system will warn you of a possible collision with the
vehicle in front of you when you are farther away. This