Table of Contents
Advertisement
4.5
Alarm
M
1. Press the
<
2. Press the
+
3. Press the
6h
4h
2h
(
,
,
). (The default setting is Alarm OFF.)
If an alarm time is selected, the Owner unit will beep for about
45 seconds after every 6, 4 or 2 hour period, and the
will flash red.
4.6
Camera Control
4.6.1 Add (pair) a camera
M
1. Press the
<
2. Press the
and the
/
+
3. Press the
the OK button to confirm.
4.
1 /
2 /
button to select the desired CAM, and press the OK button to start
searching for a pet unit. The green audio level LED will flash rapidly
while searching.
5. Press and hold the PAIR button underneath the Indoor Pet Unit until
the Owner unit finds the camera, beeps and the picture from the
camera appears.
NOTE
A camera can only be registered to one Owner unit at any one time.
4.6.2 View a camera
M
1. Press the
<
2. Press the
and the
/
+
3. Press the
the OK button to confirm.
4.
1 /
2 /
button to select desired CAM, and press the OK button to view the
picture from that camera.
Owner Unit Menu Options
button and the menu bar will pop up.
>
LEFT button or
-
UP button or
button and the menu bar will pop up.
>
LEFT button or
/
/
menu will pop up.
-
UP button or
3 /
4 will pop up, press the
button and the menu bar will pop up.
>
LEFT button or
/
/
menu pops up.
-
UP button or
3 /
4 will pop up, press the
RIGHT button until
DOWN button to select the alarm time
RIGHT button until
DOWN button to select
+
UP button or
RIGHT button until
DOWN button to select
+
UP button or
is highlighted.
alarm icon
is highlighted,
, and press
-
DOWN
is highlighted
, and press
-
DOWN
21
Advertisement
Table of Contents
