Table of Contents
Advertisement
2. During power ON, when the adapter is plugged in, the battery icon
on screen's top right corner will show that the battery is charging.
The Blue LED at the top left corner lights up to indicate that the
adapter is plugged in.
2.4
Outdoor Pet Unit Installation
IMPORTANT
• This product is not intended for submersion in water. For outdoor use,
mount it in a sheltered place where it is not directly exposed to rain or
snow.
• Determine a location for the Pet Unit that will provide the best
• view of the surrounding environment and activities you wish to
monitor.
• Select a location for the camera that has an ambient temperature
between 14°F~122°F (-10°C~50°C).
• Avoid installing the camera where there are thick walls or obstructions
between the camera and the owner unit.
• Avoid installing in a location which requires the wireless signal to pass
through cement, concrete, and metal structures. This will reduce the
range of transmission.
• Carefully plan where and how the Pet Unit will be positioned and
where you will route the cable that connects the Pet Unit to the power
adapter.
• Aim the camera(s) to best optimize the viewing area: select a location
for the camera that provides a clear view of the area you want to
monitor, that is free from dust, and that is not in line-of-sight to a
strong light source or direct sunlight.
• Before starting permanent installation, verify the Pet Unit's
performance by observing the image on a monitor when the Pet Unit
is positioned in the same location/position where it will be permanently
installed.
• Avoid letting power cords rub against any sharp edges or lie across
any high traffic areas where people might trip over them.
14
Getting Started
Advertisement
Table of Contents
