Table of Contents
Advertisement
Camera/Lens
and PTT
Assembly are
not shown for
clarity reasons.
Power Input
Cable
Make sure the cables are not crimped or chafed
when feeding them through the bottom hole.
Close the side entry hole with the ½ NPT plug.
NOTE: Make sure the BNC connector and all
other wires are tucked into an area of the
camera base where no damage can occur to
any electrical parts.
FIGURE 3 - 2
Bottom Entry Wiring Connections
BNC Connector
Power Cable to Camera Board
13
Video
Cable
VRB
Advertisement
Table of Contents
