Table of Contents
Advertisement
Operation
Master/Slave Mode
Gobo Slot
Drop-In Iris Slot
Drop-In Iris/Gobo Slot
Location Diagram
-14-
The Master/Slave mode allows a single OVATION™ ED-190WW (the "master") to control
the actions of one or more OVATION™ ED-190WW products (the "slaves") without the
need of a DMX controller to control the slaves. The master will be set to operate in Master
mode (MAST), while the slaves will be set to operate in Slave mode (SLAV). Once set
and connected, the slaves will operate in unison with the master.
Configure the products as indicated below.
The Slaves:
1. Go to the RUN main level.
2. Select SLAV.
3. Connect the DMX input of the first slave to the DMX output of the master.
4. Connect the DMX input of the subsequent slaves to the DMX output of the previous
slave.
5. Finish setting and connecting all the slaves.
The Master:
1. Go to the SET main level.
2. Select the MCON programming level.
3. Select MAST.
· Note: If you select SELF, no DMX signals are sent to the slaves.
4. Make the master the first product in the DMX daisy chain.
5. Control the master using the DMX controller and the slaves will operate in unison.
Do not connect a DMX controller to the products configured for slave operation.
The DMX controller may interfere with signals from the master.
The OVATION™ ED-190WW has a gobo slot, which holds either a standard A or B size
gobo holder (sold separately).
·
Insert the gobo holder into the gobo slot.
The OVATION™ ED-190WW has a drop-in iris, which holds either a drop-in iris or a
motorized pattern device (each sold separately).
1. Loosen the thumb screws on the slot cover.
· Note: Do not remove the screws.
2. Slide the cover forward.
3. Insert the gobo holder, iris, or motorized pattern device.
· Note: Make sure the iris handle extends upward from the slot.
4. Slide the cover back. Make sure the iris handle moves freely.
5. Tighten the thumb screws to secure the cover.
Cover Screws
Drop-in Iris
Slot Cover
· When not using the iris/gobo slot, replace and secure the slot cover to prevent
light leakage during operation.
· When obtaining any optional iris/gobo accessories, be sure the items are
compatible with the OVATION™ ED-190WW.
Gobo Slot
Gobo Holder
Iris Handle
Sample
Drop-in Iris
OVATION™ ED-190WW User Manual Rev. 1
Advertisement
Table of Contents
