Auto Ice Maker (Turning Off); Ice Tray Cleaning/Emptying Ice Tray - Sharp SJ-HD491P-S Operation Manual

Auto Ice Maker (turning off)

Select "
<When it will be OFF for a long time (such as in winter)>
Discard the water inside the water tank and set it in its specified position.
Dry the purifier filter in shade.
To set making ice cubes again
Select " "
Notes
The water in the ice tray will be frozen as is. After ice cubes are released, the ice tray will be empty.
About 2 hours may be required for ice cubes to be released.
Ice cubes will not be released when the ice case is full.
Ice Tray Cleaning
Use this feature when cleaning the ice tray (or pipe) .
At the beginning or when refrigerator has not
been used some time.
1
1
1
Fill the water tank with
water and set into the unit.
2
2
2
Operate steps (1)-(4)
listed to the right.
3
3
3
Lastly, dispose of the water
in the ice case.
Emptying Ice Tray
When not using the refrigerator for some
time or when moving the refrigerator.
1
1
1
Empty the water tank
and set into the unit.
2
2
2
Operate steps (1)-(4)
listed to the right.
3
3
3 Lastly, dispose of the water
or ice cubes in the ice case.
"
Blinks
Blinks
Blinks
Blinks
Blinks
2
2
2
(1) Select "
(2) Press "Select"
(3) Operation completes
(4) Press
Press "Select". (Operation stops)
Press
Operation starts up.
"Select".
" " will be
displayed.
"
when there is a beep.
Blinks
"Temperature zone selection".
Turn the setting to OFF when
ice cubes are not needed.
Will immediately
Lights
return to normal
up
display.
"
Lights Lights
up
Lights
up
3 3
3
<After a long period of
stopping (such as in winter)>
After washing the water
tank with water
fill the tank with water
and set into the unit.
Blinks
Blinks
Operation begins.
Operation requires about 40 seconds.
Button operation will not be accepted
while it is operating.
To clean the ice tray,
repeat (2) several times
Blinks
and go to (4).
To empty the ice tray,
go to (4).
The LCD panel returns
to normal display.
" disappears.
out
,
page 60
49