Weighing Procedure - Pipistrel Sinus 503 Flight And Maintenance Manual

50
SINUS motorglider
Weight and balance
REV. 0
Introduction
This chapter provides information on aircraft's weight and balance, which is essential for safe flying
activity.

Weighing procedure

How to weigh the aircraft and later determine the CG correctly:
Make sure all listed aircraft parts and appliances are installed and in position.
Remove all other objects (e.g. tools, mops ...).
Empty fuel tanks except for the unusable fuel.
Fill up engine oil to the top marking.
Retract flaps and spoilers, leave control surfaces centred.
Support fuselage at the rear and level the aircraft inside a closed space.
To do this, use the provided airfoil template at lower side of the wing close to the wing root
and make sure its straight edge is level (horizontal).
Once leveled, read the scale readings and subtract eventual tare weight.
Now measure and record all readings and fill out the bottom schematic.
Datum is wing's leading edge at wing root. Calculate the lever arm of CG using this formula:
Lever arm of CG (X) = ((G
Weighing form
Weighing point and symbol
right main wheel (G
left main wheel (G
tail wheel (G
total (G = G
)
D
)
L
)
2
+ G +G )
D L 2
/ G) x b) + a
2
Scale reading
www.pipistrel.si
Tare Nett