Dmx Linking; Control Panel Description - Chauvet Rogue RH1 Hybrid Quick Reference Manual

Hide thumbs Also See for Rogue RH1 Hybrid:
Table of Contents

Advertisement

Available languages

Available languages

Rogue™ RH1 Hybrid QRG

DMX Linking

DMX Connection
Mounting
Product
Mounting
Diagram
Control Panel
Description
The Rogue™ RH1 Hybrid will work with a DMX controller using a 3- or 5-pin
DMX
serial
connection.
www.chauvetprofessional.com.
The Rogue™ RH1 Hybrid uses a 3- or 5-pin DMX data connection for its DMX
personalities: 20CH and 25CH. See the User Manual for information about
connecting and configuring the product for DMX operation.
Before mounting this product, read the
point per product. Make sure the mounting clamps are capable of supporting the
weight of the product. For our Chauvet line of mounting clamps, go to
www.trusst.com/productcategory/accessories-clamps/.
Overhead Mounting
Button
<MENU>
Exits from the current menu or function
Enables the currently displayed menu or sets the currently
<ENTER>
selected value into the selected function
Navigates upwards through the menu list or increases the
<UP>
numeric value when in a function
Navigates downwards through the menu list or decreases
<DOWN>
the numeric value when in a function
A
DMX
Primer
Safety
Notes. Use at least one mounting
Mounting Clamp
Omega Bracket
Safety Cable
Function
4
EN
is
available
from
Floor Mounting

Advertisement

Table of Contents
loading

Table of Contents