Mounting; Orientation; Rigging - Chauvet SlimPar 56 IRC IP User Manual

Mounting

Orientation

Rigging

Mounting Diagram
Page 8 of 18
Before mounting the product, read and follow the safety recommendations indicated in
the Safety Notes.
The SlimPAR™ 56 IRC IP may be mounted in any position; however, make sure
adequate ventilation is provided around the product.
·
Before deciding on a location for the product, always make sure there is easy
access to the product for maintenance and programming purposes.
·
Make sure that the structure onto which you are mounting the product can support
the product's weight. Please see the Technical Specifications section of this manual
for weight information.
·
When mounting the product overhead, always use a safety cable. Mount the
product securely to a rigging point, whether an elevated platform or a truss.
·
When rigging the product onto a truss, you should use a mounting clamp of
appropriate weight capacity. The bracket has a 13 mm hole, which is appropriate for
this purpose.
·
When power linking multiple products, you must always consider the length of the
power linking cable and mount the products close enough for the cable to reach.
·
The bracket adjustment knobs allow for directional adjustment when aiming the
product to the desired angle. Only loosen or tighten the bracket knobs manually.
Using tools could damage the knobs.
·
The double bracket yoke also serves as floor supports. When mounting the product
on the floor, make sure that the product and cables are away from people and
vehicles.
·
This product is for indoor or outdoor use (IP65). Do not expose to harsh or
excessively corrosive environmental conditions (whether indoors or outdoors),
including, but not limited to, extreme temperatures, humidity, atmospheric
conditions (including salinity or pressure), radiation (UV, infrared or nuclear), shock
and conditions which exceed the product's Ingress Protection ("IP") rating. Do not
submerge this product.
Bracket Adjustment Knob
Mounting Bracket
SlimPAR™ 56 IRC IP User Manual (Rev. 2)