ZyXEL Communications P-2602HWNLI Support Notes page 152

Each field's detail description of the page is listed below.
Label Description
Table Number Select which call forwarding table you want to configure. You can configure
a different call forwarding table for each SIP account or use the same call
forwarding table for both.
The following applies to the number fields in this screen.
For a SIP number, use the number or text that comes before the @ symbol
in a full SIP URI.
These are the global call forwarding settings that define the default action
Forward to
to take on incoming calls that do not match any of the Advanced Setup call
Number
forwarding entries.
Setup
Unconditional Enable this feature to have the Prestige forward all incoming calls to the
number that you configure regardless of whether or not the phone(s)
Forward to
connected to the phone port(s) is busy.
Number
Busy Forward Enable this feature to have the Prestige forward incoming calls to the
to Number number that you configure when the phone(s) connected to the phone
port(s) is busy. With call waiting a second call is only forwarded after being
rejected.
Enable this feature to have the Prestige forward incoming calls to the
No Answer
number that you configure whenever you do not answer the call after a
Forward to
Number specific time period.
Set how long the Prestige should let a call ring before considering the call
No Answer
unanswered.
Waiting Time
Advanced Configure Advanced Setup call forwarding entries to have the Prestige
Setup perform specific actions on calls from specific numbers. If a caller's number
does not match the Incoming Call Number of any of these entries, the
Prestige performs the default action configured in the Forward to Number
Setup section.
Select this check box to turn on an call forwarding entry.
Activate
Incoming Call You can set the Prestige to take a particular action on incoming calls from a
All contents copyright (c) 2006 ZyXEL Communications Corporation.
P-2602HWNLI Support Notes
152