ZyXEL Communications P-2602HWNLI Support Notes page 136

REGISTER A SIP register server maintains a database of SIP identity-to-IP address (or
Server domain name) mapping. The register server checks your user name and
Address password when you register.
Enter the SIP register server's address in this field.
If you were not given a register server address, then enter the address
from the SIP Server Address field again here.
Enter the SIP register server's listening port for SIP in this field.
REGISTER
Server Port
If you were not given a register server port, then enter the port from the
SIP Server Port field again here.
SIP Service A SIP service domain is the domain name that comes after the @ symbol in a
full SIP URI.
Domain
Enter the SIP service domain name in this field.You can use up to 127 ASCII
Extended set characters.
User Name This is the user name for registering this SIP account with the SIP register
server. Type the user name exactly as it was given to you. Use ASCII
characters.
Password Type the password associated with the user name above. Use ASCII
Extended set characters.
Select this check box to show identification information when you make VoIP
Send Caller
calls. Clear this check box to not show identification information when you
ID
make VoIP calls.
Advanced Click Advanced Setup to open a screen where you can configure the
Setup Prestige's advanced VoIP settings like SIP server settings, the RTP port
range and the coding type.
Apply Click Apply to save your changes back to the Prestige.
Reset Click Reset to begin configuring this screen afresh.
All contents copyright (c) 2006 ZyXEL Communications Corporation.
P-2602HWNLI Support Notes
136