Change It - ZyXEL Communications P-2602HWNLI Support Notes

What is the default LAN IP address and Password? Moreover, how do I change it?
The default LAN IP address is "192.168.1.1" and you can change the LAN IP in web configuration menu under
"LAN"->LAN TCP/IP, the default password is 1234. You can change the password once you enter the web
configuration menu under "SYSTEM" and press the Password tab.
password and the new password and retype to confirm than press "Apply" button to save the change.
How do I upload the ZyNOS firmware code via embeded web configurator?
The procedure for uploading ZyNOS via embeded web configurator is as follows.
a. Log on into the web configurator.
b. Press "MAINTENANCE" from the left menu.
c. Press "F/W Upload" tab.
d. Press "browse" button and point to the directory where the firmware you want to upload is kept and
press "Upload" button.
e. It will prompt you the firmware is upload successful and Prestige will reboot.
How do I upgrade/backup the ZyNOS firmware by using FTP client program via LAN?
The Prestige allows you to transfer the firmware from/to Prestige by using FTP program via LAN. The
procedure for uploading ZyNOS via FTP is as follows.
a. To upgrade firmware, use FTP client program to put firmware in file 'ras' in the Prestige. After data
transfer is finished, the Prestige will program the upgraded firmware into FLASH ROM and reboot
itself. Note: Do not power off the unit after upload the file via ftp until the system LED have become
steady light up. Fail to due so may result in update fail and require RMA.
b. To backup your firmware, use the FTP client program to get file 'ras' from the Prestige.
How do I upload or backup ROMFILE via web configurator?
All contents copyright (c) 2006 ZyXEL Communications Corporation.
P-2602HWNLI Support Notes
At the password screen type in the old
156