Replacing The Foil Frame & Cutter - Conair LWD1C Instruction Manual

REPLACING THE
FOIL FRAME & CUTTER
Replace the foil frame when you find you
have to push harder on the shaver to get a
close shave, or if you have to go over your
leg area more often to get a smooth result. It
is also time to replace the foils if you
experience skin irritation. Replacement time
will depend on how often you use your
shaver and how quickly your hair grows.
Caution: Never replace the cutters without
replacing the foils as well.
Press Here
FIG. 2
1. Remove the foil frame. (see FIG. 2)
Hold Here
spring
FIG. 3
2. Push one side of the cutters to unlock it
and take out. (see FIG. 3) Be careful not to
lose the small spring as it will be needed with
the new cutters.
Lift
Press Here
Hold Here
spring
FIG. 4
3. Hold the new cutters firmly on the sides and
guide them gently into the inner cutter mount
one side at a time until they lock into place.
(FIG. 4)
FIG. 5
4. Press firmly until the cutter snaps into place.
5. Replace the foil frame. (FIG. 5)