Shaving Your Underarms; How To Clean Your Shaver - Conair LWD1C Instruction Manual

SHAVING YOUR UNDERARMS

1. Prepare your underarms for wet or dry
shaving. (Be sure that your skin is clean and
free of deodorant).
2. Turn the shaver on.
3. Lift your arm until the skin under the arm
stretches slightly.
4. Use the trimmer portion first to remove any
long hair, stroking trimmer against the direction
of hair growth.
5. Hold the shaver so that it is in full contact
with your skin, and shave with gentle strokes.
6. It is important to press lightly. Pressing too
hard may lead to skin irritation.
7. When finished shaving, turn the shaver off.
Important: After several uses, you will be able
to determine the optimum shaving method for
your underarms.

HOW TO CLEAN YOUR SHAVER

1. Make sure unit is in the "OFF" position
before cleaning your shaver.
2. Hold shaver head and lift up from the back,
(FIG.1) then press foil frame release buttons on
each side and lift up (the cutter is now in view).
Be careful not to push on the foils. They are
delicate and can easily be damaged.
Pop-up button
Press Here
FIG. 1
3. Rinse the shaver cutter and foil frame under
running water or in a sink. Do not use hot water.
Use only warm or cold water.
4. After wet cleaning, allow the foil frame and
cutters to air-dry before closing foil frame and
shaver head. Replace shaver head back onto the
shaver until it clicks into place. Wipe the surface
of the main unit with a dry towel. Do not dry the
foil area. Let the shaving head air-dry.
5. The cutter can also be cleaned with a
cleaning brush.
Transparent cover
Press Here