Instructions For Use; Before Shaving; Shaving Your Legs/Bikini Area - Conair LWD1C Instruction Manual

12. Do not mix old and new batteries. Do not
mix alkaline, standard (Carbon-Zinc), or
rechargeable (Nickel cadmium or Nickel
Metal Hydride) batteries.
CAUTION
Do not immerse any part of the unit in water or
other liquid.
The outer foils and cutters are delicate and
must be handled very carefully.

BEFORE SHAVING

1. Before wet shaving, you may wish to
prepare your legs and underarms with
shaving cream or soap. If a soapy lather is
applied to the skin, the shaver will glide
smoothly over the skin and clean away oil
residue while at the same time removing
hair. Caution: DO NOT use shaving gels, as
these products can clog your shaver foils.
2. When dry shaving, be certain that your
skin is clean. If you have sensitive skin, you
may want to apply talcum powder before and
after you shave.
3. Clean your shaver after each use. This will
insure the best performance. (Please refer to
"How to Clean Your Shaver" section for
further instructions.)

INSTRUCTIONS FOR USE

1. Slide the main switch up to the ON position.
2. After each shave, switch the unit off and clean
shaver head.

SHAVING YOUR LEGS/BIKINI AREA

NOTE: Pushing the shaver against the skin too
hard will not allow the hairs to enter the foils and
be cut. Experience will show just the right
pressing to use to maximize performance.
1. Prepare your legs for wet or dry shaving.
2. Turn shaver on.
3. Shave with smooth, steady strokes up and
down your skin.
4. Keep the full shaving head in contact with
your skin.
5. For best results, shave against the direction of
hair growth.
6. The shaver has a bikini pop-up trimmer for
your complete shaving needs. To trim the bikini
area, use the handy pop-up feature to easily see
what you are trimming.
7. When you finish shaving, turn the shaver off.
Important: After several uses, you will be able to
determine the optimum shaving method for your
legs and bikini area.