Conair LT3CSC Operating Instructions

Instruction Guide
For your safety & continued
enjoyment of this product,
always read the instruction book
carefully before using.
Model LT3CSC
OPERATING
INSTRUCTIONS
Prior to initial use, test trimmer on small area
of arm or leg. If any signs of allergic reaction
or sensitivity occur, discontinue use. Do not
use trimmer on ultra sensitive or irritated skin.
Keep out of reach of children.
TO OPERATE TRIMMER
This trimmer comes with a two trimming
blades. The larger blade can be used to trim
body hair and eyebrows. The smaller blade is
ideal for detailing.
It also comes with an attachment comb that
helps you achieve an even cut when you do not
want to completely remove the hair. The attach-
ment comb has two sides, the longer tooth is
good for body hair while the
shorter one is good for eyebrow
trimming. Aligning the indicator
with the L mark on the comb
leaves hair longer while aligning
with S mark leaves hair shorter.
To use the attachment comb, be
sure the unit is in the "off" posi-
tion and slide it over the trimming blades. Make
sure that the teeth of the comb are facing in the
same direction as the trimming blade and that
the top of the comb is even with the top of the
trimmer. (See Fig. 1)
If you want to completely remove hair, use the
trimmer without the attachment comb.
To operate the trimmer, slide the "on" switch
®
towards the trimming blades. When you are fin-
ished trimming, slide the "on" switch away from
the blades.
BEFORE USE:
Long
Tooth
Short
Tooth
Fig. 1