Advertisement
IMPORTANT SAFETY
INSTRUCTIONS
When using electrical appliances, especially when children are present, basic
safety precautions should always be taken, including the following:
READ ALL INSTRUCTIONS BEFORE USING
KEEP AWAY FROM WATER
DANGER –
Any appliance is electrically live, even when the
switch is off. To reduce the risk of death or injury by electric shock:
1. Do not place or store appliance where it could fall or be pulled into a tub
or sink.
2. Do not use appliance while bathing or in the shower.
3. Do not place appliance in, or drop into, water or other liquid.
4. If appliance has fallen into water, do not reach for it.
DO NOT REACH INTO THE WATER
WARNING –
To reduce the risk of burns, electric shock, fire, or
injury to persons:
1. This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the
appliance.
2. Use appliance only for its intended use as described in this manual. Only use
attachments recommended by the manufacturer.
3. Never drop or insert any object into any opening of the appliance.
4. Do not place the appliance on any surface while it is operating.
5. Never operate the appliance with the air openings blocked or place
appliance on a soft surface, such as a bed or couch, where the air openings
may be blocked. Keep the air openings free of lint, hair, an the like.
6. Do not use this appliance with a damaged or broken foil or cutter, as injury
to skin may occur.
7. Do not use the appliance outdoors or where aerosol (spray) products are
being used or oxygen is being administered. oxygen is being administered.
SAVE THESE INSTRUCTIONS
OPERATING INSTRUCTIONS
IMPORTANT
This shaver has been engineered to give you a clean, close, smooth shave.
It requires 2 AA batteries (not included). We recommend using longer-lasting
alkaline batteries in your shaver. If you are not going to use your shaver for a
long period of time or if the batteries are dead, remove or replace the batteries
from the unit.
1. Remove the metal housing by sliding the release button over and pulling
the cover off.
2. Align the 2 AA batteries with the positive and negative positions indicated
inside the battery compartment. Being careful not to bend the springs,
insert the negative end of each battery first so it will slip easily into place.
3. Return the metal housing by sliding it over the plastic inner housing until it
clicks into place.
4. To use your shaver, push ON/OFF switch upward to the ON (I) position.
5. After you finish using your shaver, push down on the ON/OFF switch to turn
the shaver OFF (O).
6. Remove the batteries if the batteries are no longer functional or if the shaver
is left unused for an extended period of time.
7. Clean the battery contacts and also those of the device prior to battery
installation.
8. Remove used batteries promptly.
9. Always purchase the correct size and grade of battery most suitable for the
intended use.
Advertisement
