Using The Parking Brake; Manual Release; Automatic Release - Volvo XC90 Quick Manual

Hide thumbs Also See for XC90:

Table of Contents

Enlarged version

USING THE PARKING BRAKE

Setting

1. With the gear selector in P, press the brake pedal.

2. Pull the control up. A symbol in the instrument panel will

illuminate when the parking brake has been set.

1. Press the brake pedal.

2. Press the control down. The symbol in the instrument

panel will go out when the parking brake has released.

1. Buckle your seat belt.

2. Start the engine and press the brake pedal.

3. Move the gear selector to D or R and press the accelera-

tor pedal. The symbol in the instrument panel will go out

when the parking brake has released.

With the "Auto-hold" function, the driver can release the

brake pedal when the car is at a standstill (e.g., at a traffic

light) and the brakes will remain applied. The brakes will

release when the accelerator pedal is pressed.

– Press the button in the tunnel console to activate/deacti-

vate the function. Once activated, the function remains so

until the button is pressed again.

Table of Contents