Olympus STYLUS 1s Instruction Manual page 83

 Custom printing
1
Connect the camera to the printer using the supplied USB cable and turn
the camera on.
• When the camera is turned on, a dialog should be
displayed in the monitor prompting you to choose a
host. If it is not, select [Auto] for [USB Mode] (P. 68) in the
camera custom menus.
2
Use FG to select [Custom Print].
• [Do Not Remove USB Cable] will be displayed, followed
by a print-mode selection dialog.
• If the screen is not displayed after a few minutes, disconnect the USB cable and start
again from Step 1.
3
Follow the operation guide to set a print option.
Selecting the print mode
Select the type of printing (print mode). The available print modes are as shown below.
Print
All Print
Multi Print
All Index
Print Order
Setting the print paper items
This setting varies with the type of printer. If only the printer's STANDARD setting is
available, you cannot change the setting.
Size
Borderless
Pics/sheet
Prints selected pictures.
Prints all the pictures stored in the card and makes one print for
each picture.
Prints multiple copies of one image in separate frames on a single
sheet.
Prints an index of all the pictures stored in the card.
Prints according to the print reservation you made. If there is no
picture with print reservation, this is not available.
Sets the paper size that the printer supports.
Selects whether the picture is printed on the entire page or inside a
blank frame.
Selects the number of pictures per sheet. Displayed when you have
selected [Multi Print].
USB
Storage
MTP
Easy Print
Custom Print
Set
10
EN 83