Olympus STYLUS 1s Instruction Manual page 76

b K Utility
Option
Pixel Mapping
Exposure Shift
Level Adjust
Touch Screen
Settings
Eye-Fi*
m/ft
EVF Adjust
9
EVF Auto Switch
While Exposing " Sets whether to continue to stabilize an image.
* Use in accordance with local regulations. Onboard airplanes and in other locations in
which the use of wireless devices is prohibited, remove the Eye-Fi card from the camera
or select [Off] for [Eye-Fi].
The camera does not support the "endless" Eye-Fi mode.
76 EN
The pixel mapping feature allows the camera to check
and adjust the image pickup device and image processing
functions.
Adjust optimal exposure separately for each metering mode.
• This reduces the number of exposure compensation
options available in the selected direction.
• The effects are not visible in the monitor. To make
normal adjustments to the exposure, perform exposure
compensation (P. 29).
Adjust the angle of the virtual horizon.
[Reset]: Restore the factory default angle.
[Adjust]: Set the virtual horizon to the camera's current angle.
• To view the virtual horizon, select [On] for a [G/Info
Settings] (P. 72) > [LV-Info] level gauge option and then
press the INFO button until the virtual horizon appears in
the shooting display.
Activate the touch screen. Choose [Off] to disable the touch
screen.
Enable or disable upload when using an Eye-Fi card.
When [AF Mode] (P. 39) is set to [MF], you can select meters
or feet as the unit of length displayed on the monitor.
Adjust the brightness and
color temperature of the
electronic viewfinder. Color
temperature applies to the
viewfinder display. Use HI
to select color temperature
(j) or brightness (k) and
use FG to choose from
values between [+7] and [–7].
Brightness is automatically adjusted when [EVF Auto
Luminance] is set to [On].
Sets whether to automatically switch the EVF.
If [Off] is selected, the viewfinder will not turn on when
you put your eye to the viewfinder. Use the u button to
choose the display. The same menu can also be displayed
by pressing and holding the u button.
When set to [On], an image is stabilized during shooting.
The image is more stabilized.
Description
EVF Adjust
Back
b
MENU c
g
98
—
—
—
100
—
j k
-5 +2
—
Set
—
33, 50