Subaru FORESTER 2001 Service Manual page 16

C: ADJUSTMENT
1) Using special tool, loosen body-side bolts of
upper and lower hinges to align the position of rear
door panel longitudinally and vertically.
2) Loosen door-side bolts of upper and lower
hinges to align the position of rear door panel ver-
tically and laterally at front-end.
3) Loosen screw (A) and lightly tap striker (B)
using plastic hammer to adjust striker to align the
position of front door panel vertically and laterally
at the rear end.
CAUTION:
Do not use an impact wrench. The welding area
on the striker nut plate is easily broken.
REAR DOOR PANEL
S913364A01
B5M0933A
G5M0385
B5M0934A
EB-15
Exterior Body Panels