Subaru FORESTER 2001 Service Manual page 13

Exterior Body Panels
C: ADJUSTMENT
1) Using special tool, loosen body-side bolts of
upper and lower hinges to align the position of front
door panel longitudinally and vertically.
ST 925610000 DOOR HINGE WRENCH
2) Loosen door-side bolts of upper and lower
hinges to align the position of front door panel ver-
tically and laterally at the front end.
3) Loosen screw (A) and lightly tap striker (B)
using plastic hammer to adjust striker to align the
position of front door panel vertically and laterally
at the rear end.
CAUTION:
Do not use impact wrench. Welding area on
striker nut plate is easily broken.
FRONT DOOR PANEL
S913366A01
B5M0933A
G5M0385
B5M0934A
EB-12