Before Using - Techni-Lux HMI 1200W/S XS User Manual

STEP 2
STEP 1
STEP 3
STEP 5
STEP 4

BEFORE USING

1) Open the top of the box, take out the foam protection and the sides polystyrene and put it on a flat plane to operate.
Don't handle the fixture by taking it by the bracket or the head, but always by using the special handles on the base.
2) Read all cautions and warnings on the user's manual and particularly page 1 prior to install this equipment.
3) Release the Pan and Tilt lock mechanism. For your following requirement, lock the head in vertical or horizontal position.
4) For spot installation to a truss, check carefully that the security ring is well fixed with a chain to both truss and unit.
5) On the metal fixing plate (with 1/4 turn fasteners) you can rig the fixture with the aluminium clamps (optional).
!
WARNING
Check that the spot has not been damaged during transport.
If it has been damaged or it does not work, address the seller.
Whether the spot has been shipped to you directly, please contact the shipping company.
Only the consignee (person or company) can claim for these damages.
... 4 ...